Updating bios asus rom

Right-click the USB drive icon and choose "Format."Select the option "FAT32" from the "File System" drop-down menu and click "Format." Then click "Yes" to start USB drive formatting.

Wait for a message that indicates formatting is complete.

The difference was that the last configuration of the key had the boot flag set. Feb 2018 1215N: Successfully upgraded to 1215N-ASUS-0902. ROM") using the smallest USB stick i could find (256 MB FAT 16) and the Alt F2 method.

It did not work with a 16GB stick even with only a 16 MB FAT 16 partition on it!

If you have experience with an unlisted model or additional experience with a listed model, please edit the page and add your notes.700 (a.k.a. Press F10 to save changes and proceed to normal boot. 701SD Model: Got hold of 701SD-ASUS-0602.zip, unpacked it to 701SD-ASUS-0602. 1000 Linux Model: Success updating to BIOS version 0803 on a 1000 (Linux model). The native ASUS EZ Flash utility, 8GB Transcend USB stick, Free DOS USB Full image ( were used to flash BIOS. The regular method did not work: I created the FAT16 filesystem on the stick but it was unsuitable for the EZ Flash. ROM" file was found on USB drive but the utility stuck on the file reading stage.

2G Surf) Model: Download 700-ASUS-0401.zip, extract 700-ASUS-0401. Note that the upgrade will reset the bios settings (there are a just a few, anyway). When I tried to use Free DOS and afudos, a thought came into my head that maybe the current filesystem of the flash stick is suitable for the flash utility and it was true.

The bios zip file is also without the model number for this model. The filesystem of the partition on the stick was fat16 and it had 511.84 Mi B of memory.

Computers are now coming with UEFI firmware instead of the traditional BIOS, but the same is true for UEFI – it’s low-level system software with a similar role.

Unlike your operating system (which is stored on your hard drive), your computer’s BIOS is stored on a chip on your motherboard.

Click "Start" in Windows, and then click "Computer" to open Windows Explorer.

Use Windows Explorer to copy the BIOS file to the USB flash drive.

Leave a Reply